See Matches In
Narrow Search Results
Price Range
Brand
Stores
Best Seller | NORD SK673.1-100LP/4, 41.54 AC Gearmotor, 5,664.0 in-lb Max. Torque, 43 RPM AC Gearmotor, Number of Output Shafts 1, Motor Type 3-Phase, Motor Enclosure Totally Enclosed Fan-Cooled, Nameplate Speed 43 RPM, Maximum Torque 4,613 in-lb, Overhung Load Capacity 2,241 ft-lb, Rotation CW/CCW, Output Shaft Height 5.12 in, Mounting... more | go to store |
DAYTON 1L510 AC Gearmotor, 1,100.0 in-lb Max. Torque, 6.5 RPM Nameplate RPM, AC Gearmotor, Number of Output Shafts 2, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Fan-Cooled, Nameplate Speed 6.5 RPM, Maximum Torque 1,100 in-lb, Overhung Load Capacity 550 ft-lb, Rotation CW/CCW, Mounting Orientation Any... more | go to store |
DAYTON 6Z399 AC Gearmotor, 1,087.0 in-lb Max. Torque, 5.4 RPM Nameplate RPM, AC Gearmotor, Number of Output Shafts 1, Motor Type Split-Phase, Motor Enclosure Totally Enclosed Fan-Cooled, Nameplate Speed 5.4 RPM, Maximum Torque 1,087 in-lb, Overhung Load Capacity 325 ft-lb, Rotation CW/CCW, Output Shaft Height 3 in, Mounting... more | go to store |
3M 8445-7.5 Shrink Tubing,0.72in ID,Gray,7-1/2in Cold Shrink Tubing, Medium Wall, Material EPDM Rubber, Flexible, Flame Retardant No, Adhesive Lined No, Shrink Ratio Not Rated, Use With Wire Size 2 AWG to 1/0 AWG, I.D. Before Shrinking 0.72 in, I.D. After Shrinking 0.35 in, Wall Thickness After... more | go to store |
3M EPS300-1 1/2-48"-BLACK-5 PCS Shrink Tubing,1.5in ID,Black,4ft,PK5 Heat Shrink Tubing, Thin Wall, Material Polyolefin with Adhesive, Flexible, Flame Retardant Yes, Adhesive Lined Yes, Shrink Ratio 3:1, Use With Wire Size 3/0 AWG to 400 MCM, I.D. Before Shrinking 1.5 in, I.D. After Shrinking 0.51 in, Wall Thickness... more | go to store |
ASHCROFT B424VXCYLM15 Pressure Switch, (1) Port, 1/4 in FNPT, SPDT, 1.5 to 15 Pressure Switch, Differential 0.5 to 1.5 psi, Range 1.5 to 15 psi, Port Type 1-Port 1/4 in FNPT, Contact Form SPDT, NEMA Rating 13, 3, 4, 4X, Actuation Type Diaphragm, Action Standard, Series B, Factory On/Off Setting 90 Percent of Range, AC Contact... more | go to store |
HONEYWELL LSZ52D Roller Lever Arm,1.5 to 3.5 In Arm L Limit Switch Lever Arm, Actuator Type Adjustable Roller, For Use With Mfr. No. 14CE, 914CE, LS, HDLS, HDLS Fully Potted, HDLS Stainless Steel, Arm Length 1.50 in to 3.50 in, Roller Position Front, Roller Dia. 0.75 in, Roller Width 0.25 in, Arm Material... more | go to store |
HONEYWELL LSZ52N Roller Lever Arm,1.5 to 3.5 In Arm L Limit Switch Lever Arm, Actuator Type Adjustable Roller, For Use With Mfr. No. 14CE, 914CE, LS, HDLS, HDLS Fully Potted, HDLS Stainless Steel, Arm Length 1.50 in to 3.50 in, Roller Position Front, Roller Dia. 0.75 in, Roller Width 0.4 in, Arm Material... more | go to store |
HONEYWELL LSZ52B Roller Lever Arm,1.5 to 3.5 In Arm L Limit Switch Lever Arm, Actuator Type Adjustable Roller, For Use With Mfr. No. 14CE, 914CE, LS, HDLS, HDLS Fully Potted, HDLS Stainless Steel, Arm Length 1.50 in to 3.50 in, Roller Position Back, Roller Dia. 0.75 in, Roller Width 0.25 in, Arm Material... more | go to store |
HONEYWELL LSZ52Y Roller Lever Arm,1.5 to 3.5 In Arm L Limit Switch Lever Arm, Actuator Type Adjustable Roller, For Use With Mfr. No. 14CE, 914CE, LS, HDLS, HDLS Fully Potted, HDLS Stainless Steel, Arm Length 1.50 in to 3.50 in, Roller Position Front, Roller Dia. 2.0 in, Roller Width 0.5 in, Arm Material... more | go to store |
HONEYWELL LSZ52A Roller Lever Arm,1.5 to 3.5 In Arm L Limit Switch Lever Arm, Actuator Type Adjustable Roller, For Use With Mfr. No. 14CE, 914CE, LS, HDLS, HDLS Fully Potted, HDLS Stainless Steel, Arm Length 1.50 in to 3.50 in, Roller Position Back, Roller Dia. 0.75 in, Roller Width 0.25 in, Arm Material... more | go to store |
HONEYWELL LSZ52M Roller Lever Arm,1.5 to 3.5 In Arm L Limit Switch Lever Arm, Actuator Type Adjustable Roller, For Use With Mfr. No. 14CE, 914CE, LS, HDLS, HDLS Fully Potted, HDLS Stainless Steel, Arm Length 1.50 in to 3.50 in, Roller Position Front, Roller Dia. 2.0 in, Roller Width 0.5 in, Arm Material... more | go to store |
HONEYWELL LSZ52C Roller Lever Arm,1.5 to 3.5 In Arm L Limit Switch Lever Arm, Actuator Type Adjustable Roller, For Use With Mfr. No. 14CE, 914CE, LS, HDLS, HDLS Fully Potted, HDLS Stainless Steel, BX, BX2, CX, LSX, Arm Length 1.50 in to 3.50 in, Roller Position Front, Roller Dia. 0.75 in, Roller Width... more | go to store |
PANDUIT G1X1.5LG6-A Wire Duct,Wide Slot,Gray,1.26 W x 1.5 D Wiring Duct, Wall Type Wide Slot, Width 1 1/4 in, Height 1 5/8 in, Slot Width 0.3 in, Material Lead-Free PVC, Color Gray, Mounting Style Screw Mount/Adhesive Back, Length 72 in, Slot Height 0.6 in, Slot-to-Slot Centerline 4/5 in, Standards CE... more | go to store |
PANDUIT G1.5X1.5LG6-A Wire Duct,Wide Slot,Gray,1.75 W x 1.5 D Wiring Duct, Wall Type Wide Slot, Width 1 3/4 in, Height 1 5/8 in, Slot Width 0.3 in, Material Lead-Free PVC, Color Gray, Mounting Style Screw Mount/Adhesive Back, Length 72 in, Slot Height 0.6 in, Slot-to-Slot Centerline 4/5 in, Standards CE... more | go to store |
PANDUIT G1X1.5LG6 Wire Duct,Wide Slot,Gray,1.26 W x 1.5 D Wiring Duct, Wall Type Wide Slot, Width 1 1/4 in, Height 1 5/8 in, Slot Width 0.3 in, Material Lead-Free PVC, Color Gray, Mounting Style Screw Mount, Length 72 in, Slot Height 0.6 in, Slot-to-Slot Centerline 4/5 in, Standards CE Compliant, CSA... more | go to store |
PANDUIT G1.5X1.5WH6 Wire Duct,Wide Slot,White,1.75 W x 1.5 D Wiring Duct, Wall Type Wide Slot, Width 1 3/4 in, Height 1 5/8 in, Slot Width 0.3 in, Material Lead-Free PVC, Color White, Mounting Style Screw Mount, Length 72 in, Slot Height 0.6 in, Slot-to-Slot Centerline 4/5 in, Standards CE Compliant, RoHS, UL... more | go to store |
3M 8443-6.5 Shrink Tubing,0.56in ID,Gray,6-1/2in Cold Shrink Tubing, Medium Wall, Material EPDM Rubber, Flexible, Flame Retardant No, Adhesive Lined No, Shrink Ratio Not Rated, Use With Wire Size 6 AWG to 2 AWG, I.D. Before Shrinking 0.56 in, I.D. After Shrinking 0.27 in, Wall Thickness After... more | go to store |
MARATHON MOTORS 056H17T2017 Vector Motor,1.5 lb-ft,1/2 HP,230/460 V Vector Motor, Three Phase, Motor Design 3-Phase, 1/2 HP, Nameplate RPM 1,725, No. of Speeds 1, Voltage 230/460V AC, Full Load Amps 1.8/0.90 A, 56C Frame, Torque 1.5 ft-lb, Max. Speed 5,400 RPM, Speed Range 1,000:1, Usable @ 208V No, Usable @ 200V No,... more | go to store |
3M FP301-1 1/2-6"-CLEAR-10-3 PC PKS Shrink Tubing,1.5 In ID,Clear,6 In,PK3 Heat Shrink Tubing, Thin Wall, Material Polyolefin, Flexible, Flame Retardant Yes, Adhesive Lined No, Shrink Ratio 2:1, Use With Wire Size 500 MCM to 800 MCM, I.D. Before Shrinking 1.5 in, I.D. After Shrinking 0.75 in, Wall Thickness After Shrinking... more | go to store |
HONEYWELL 6PA71 Roller Lever Arm,1.5 In. Arm L Limit Switch Lever Arm, Actuator Type Standard Roller, For Use With Mfr. No. LS Series, Arm Length 1.5 in, Roller Position Front, Roller Dia. 0.75 in, Roller Width 0.25 in, Arm Material Zinc, Roller Material Nylon, Arm Width 0.75 in, Arm Depth 0.75 in more | go to store |
TELEMECANIQUE SENSORS 9007B1 Roller Lever Arm,1.5 In. Arm L Limit Switch Lever Arm, Actuator Type Standard Roller, For Use With 9007C, Mfr. No. 9007T/FT, Arm Length 1.5 in, Roller Position Outside Offset, Roller Dia. 0.75 in, Roller Width 0.25 in, Arm Material Zinc, Roller Material Steel, Arm Width 0.44 in, Arm... more | go to store |
DORMEYER 3001-M-1 Solenoid,Laminatd,1/8 - 1-1/4in,Continus Solenoid, Laminated, Stroke Range 1/8 in to 1-1/4 in, Pull Force Range 192.0 to 256.0 oz, Width 2 3/8 in, Depth 2 15/16 in, Length 3 in, Coil Volts 240V AC, Seated Amps 0.33 A, Seated Watts 23.5 W, Coil Resistance 26.0 ohm, Terminals Solder Lug Coil,... more | go to store |
EATON E50KL377 Cutler-Hammer Limit Switch Arm,Roller,1.5 In. Arm L Limit Switch Lever Arm, Actuator Type Standard Roller, For Use With E50AR16P, Mfr. No. E50AR1, Arm Length 1.5 in, Roller Position Front, Roller Dia. 0.75 in, Roller Width 1 in, Arm Material Nylon, Roller Material Nylon, Arm Width 0.75 in, Arm Depth... more | go to store |
TELEMECANIQUE SENSORS 9007LA4 Roller Lever Arm,1.5 In. Arm L Forked Roller Lever, Actuator Type Forked Roller, For Use With 9007AW, Mfr. No. 9007C, Arm Length 1.5 in, Roller Position Outside Offset, Roller Dia. 0.75 in, Roller Width 0.25 in, Arm Material Zinc, Roller Material Steel, Arm Width Tapered, Arm Depth... more | go to store |
3M ITCSN-1500-48"-BLACK-5 PCS Shrink Tubing,1.5in ID,Black,4ft,PK5 Heat Shrink Tubing, Heavy Wall, Material Cross-Linked Polyolefin with Adhesive, Rigid, Flame Retardant No, Adhesive Lined Yes, Shrink Ratio 3:1, Use With Wire Size 3/0 AWG to 400 MCM, I.D. Before Shrinking 1.5 in, I.D. After Shrinking 0.5 in, Wall... more | go to store |
3M ITCSN-1100-48"-BLACK-5 PCS Shrink Tubing,1.1in ID,Black,4ft,PK5 Heat Shrink Tubing, Heavy Wall, Material Cross-Linked Polyolefin with Adhesive, Rigid, Flame Retardant No, Adhesive Lined Yes, Shrink Ratio 3:1, Use With Wire Size 2 AWG to 4/0 AWG, I.D. Before Shrinking 1.1 in, I.D. After Shrinking 0.37 in, Wall... more | go to store |
TECHFLEX FIN1.00RD5 Sleeving,1.000 In.,5 ft. L,Red Sleeving, Properties Abrasion Resistant, Cut Resistant, Heat Resistant, Sleeve Construction Coated, Material of Construction Fiberglass, Max. Operating Temperature 500 Degrees F, Inside Diameter 1 in, Wall Thickness 0.07 in, Color Red, Length 60 in,... more | go to store |
TECHFLEX FIN1.50RD5 Sleeving,1.500 In.,5 ft. L,Red Sleeving, Properties Abrasion Resistant, Cut Resistant, Heat Resistant, Sleeve Construction Coated, Material of Construction Fiberglass, Max. Operating Temperature 500 Degrees F, Inside Diameter 1 1/2 in, Wall Thickness 0.07 in, Color Red, Length 60... more | go to store |
TECHFLEX FIN1.25RD5 Sleeving,1.250 In.,5 ft. L,Red Sleeving, Properties Abrasion Resistant, Cut Resistant, Heat Resistant, Sleeve Construction Coated, Material of Construction Fiberglass, Max. Operating Temperature 500 Degrees F, Inside Diameter 1 1/4 in, Wall Thickness 0.07 in, Color Red, Length 60... more | go to store |
DAYTON 4Z857 Speed Reducer, Indirect Drive, 57.5:1 Speed Reducer, Input Connection Type Indirect Drive, Gear Type Helical, Output Shaft Type Keyed, Maximum Output Speed 30 RPM, Base to Center 4.88 in, Gear Ratio 57.5:1, Rotation CW/CCW, Maximum Input Horsepower 0.5 hp, Maximum Output Torque 998 in-lb,... more | go to store |
LEESON 108023.00 DC Permanent Magnet Motor,5.0A,1 HP DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1 HP, Nameplate RPM 1,750, Voltage 180V DC, 5.0 A Full Load Amps, 56C Frame, Full Load Torque 36 in-lb, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp.... more | go to store |
WEG .5018ES3E56-S 3-Phase General Purpose Motor, 0.5 HP, 56 Frame, 208-230/460V General Purpose Motor, Three Phase, Motor Design 3-Phase, 1/2 HP, Nameplate RPM 1,760, No. of Speeds 1, Voltage 208-230/460V AC, Full Load Amps 1.91-1.72/0.862 A, 56 Frame, Usable @ 208V Yes, Usable @ 200V No, Hz 60 Hz, Motor Service Factor 1.15, Max.... more | go to store |
SQUARE D CC112.0 Thermal Unit,63.5 to 79.0A Thermal Unit, Trip Class 20, Overload Protection Type Melting Alloy, Full Load Current 55.8 to 60.3 A, 61.4 to 63.5 A, 64 to 68.4 A, 64.9 to 67.1 A, 65.2 to 67.7 A, 67.3 to 72.4 A, 68.8 to 71.4 A, 69 to 71.9 A, 74.9 to 79.7 A, 75.1 to 78.1 A, NEMA Size... more | go to store |
DAYTON 1MBF6 AC Gearmotor, 26.0 in-lb Max. Torque, 11.5 RPM Nameplate RPM, 115V AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Open Air-Over, Nameplate Speed 11.5 RPM, Maximum Torque 26 in-lb, Overhung Load Capacity 41 ft-lb, Rotation CW, Output Shaft Height 1.41 in, Mounting Orientation Any... more | go to store |
DAYTON 1MBG6 AC Gearmotor, 5.0 in-lb Max. Torque, 214 RPM Nameplate RPM, 115V AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Open Air-Over, Nameplate Speed 214 RPM, Maximum Torque 5 in-lb, Overhung Load Capacity 2 ft-lb, Rotation CW, Output Shaft Height 1.41 in, Mounting Orientation Any Angle,... more | go to store |
DAYTON 52JE22 AC Gearmotor, 35.0 in-lb Max. Torque, 5.8 RPM Nameplate RPM, 230V AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Open Air-Over, Nameplate Speed 5.8 RPM, Maximum Torque 35 in-lb, Overhung Load Capacity 30 ft-lb, Rotation CW, Output Shaft Height 1.58 in, Mounting Orientation Any Angle,... more | go to store |
3M ITCSN-0800-48"-BLACK-5 PCS Shrink Tubing,0.8in ID,Black,4ft,PK5 Heat Shrink Tubing, Heavy Wall, Material Cross-Linked Polyolefin, Rigid, Flame Retardant No, Adhesive Lined No, Shrink Ratio 3:1, Use With Wire Size 8 AWG to 1/0 AWG, I.D. Before Shrinking 0.8 in, I.D. After Shrinking 0.2 in, Wall Thickness After... more | go to store |
Ads related to vornado lucerna one 0 5